There are so many things that homeowners and builders alike would want to know when they are trying to integrate structural or decorative iron beam straps with the use of timber and one of which is how they can possibly search for the finest wood connector iron faceplate size. If you are going to have a new construction project, take note that you will need the service of an engineer or even an architect since they are the ones capable of specifying all the requirements needed for your application, which may include width, minimum thickness and also, size for the iron faceplates. In addition to that, there goes the fact as well that architects and engineers have the ability of specifying the length and the diameter of the fasteners (which can be lags or bolts) that are used in attaching the wood construction tie, determining the structural value of the post beam connection itself. The difference between bolts and lags as fasteners is that bolts can be rated as a structural grade eight as it can be bolted in through the beam using a nut on the other end while the lag only has a pull out value, which means that it can only be rated as a grade five in structural integrity.
We are sure that many of you would want to know how you can possibly choose the best wood connector iron faceplate size that you can add to your existing beam structure for added support and what we can tell you about it is that you have to start by acknowledging that you are doing a simulation of a structural beam support. With this, the best possible thing that you can do is to choose a size that is larger enough so that your structural beam support will appear that it really has a structural value. In our research, we have found out that the finest way of choosing a size for wood connector iron faceplate is to cut a template out of a paper or a cardboard and then tape it or staple it or even tack it to your beam. It would be best for you to start with two inches wide and eight inches tall or long.
The next thing that we want you to do so you can get the right size for your wood connector iron faceplate is to paint your template black in order for you to visualize it or you can use a black poster board, and if you are worried about the design, you should now since the focus of this is getting the basic size.